China's First List of LED Lighting Subsidies Was Released, and 10 Listed Companies Were Shortlisted

After the financial subsidy promotion project of semiconductor lighting products in 2012 / 2013 was restarted, the shortlist was finally released. According to the official website of China Electronics Import and Export Corporation, dozens of companies were shortlisted in four projects, including 10 listed companies including Zhouming technology. It is reported that the reason for the restart of the project, in addition to the disorder of the first quotation, the most important thing is to improve the overall number of winning bids, which will undoubtedly play a positive role for the winning company.

10 listed companies won the bid

According to the information on the official website of China Electronics Import and Export Corporation, among the listed companies, Zhouming technology has the most successful products. The company has won four packages: LED downlight, reflective self ballasting led, LED street lamp and LED tunnel lamp, and a total of 10 products have been shortlisted; In addition, Yaming Lighting under Qinshang optoelectronics and Feile audio also appeared on the list of 4 packages, with a total of 9 winning products; Dehuorunda, Guoxing optoelectronics and sunshine lighting won three packages respectively; Foshan Lighting, Xiamen San'an optoelectronics Co., Ltd. and Wuxi shiyida, a holding subsidiary of shiyida, won two packages respectively; Xuelaite won the bid only in the reflective self ballasting LED lamp project, with 2 winning products.

In fact, the above projects promoted by the Ministry of finance, the national development and Reform Commission and the Ministry of science and technology are also the first subsidy projects for LED products. As early as February this year, the project had been mentioned, but it was not restarted until August. What is the reason?

Analyst: demonstration effect

"There are two main reasons for this.". An analyst at a securities firm in Guangdong said that first, the first bidding was not standardized, and the quotations among companies were chaotic; The second reason is to increase the overall amount of subsidies.

According to public information, the executive meeting of the State Council chaired by Premier Wen Jiabao on May 16 identified policies and measures to promote the consumption of energy-saving household appliances and other products, of which 2.2 billion yuan will be allocated to support the promotion of energy-saving lamps and LED lamps.

"In fact, since 2009, the state has subsidized energy-saving lighting, but this is the first time that led products have been included in the coverage.". The above analysts said that this fully illustrates the policy guidance direction for product development and the encouragement of new products, "don't all go to chips".

According to China's "12th Five Year Plan" for the development of semiconductor lighting technology, by 2015, the scale of China's LED lighting industry will reach 500 billion yuan, and LED lighting products account for 30% of general lighting; Focus on cultivating 20 30 leading enterprises, build 20 national industrial bases and 50 pilot demonstration cities of "ten cities and ten thousand lamps", and promote China's semiconductor lighting industry to enter the top three in the world.

"From our point of view, the amount of this project accounts for a relatively small proportion of the bid winning company, which mainly plays an exemplary role." the above analysts further said that because the threshold of LED application is not high, many enterprises can produce, which can be seen from the first bidding. However, the latest bidding project has normative significance, because the shortlisted enterprises are relatively excellent in terms of production capacity, technology and cost performance.

Although the application of LED market is still relatively scattered, the market space is still considerable for enterprises with certain strength. For example, sunshine lighting staff told reporters that the company's led business had an income of tens of millions last year, but with the rapid development, this business may reach the level of 300 million yuan by the end of this year. Qinshang optoelectronics staff said that the shortlisting of enterprises has a positive impact on the company, and the subsequent bid winning situation will be announced and disclosed according to the amount.

China's First List of LED Lighting Subsidies Was Released, and 10 Listed Companies Were Shortlisted 1

get in touch with us
Artikel yang disarankan
Multi Channel Laser Anti-theft Alarm Circuit
The figure shows the circuit of multi-channel laser anti-theft alarm. VT1, vt2, RL1, RP1, R1, K and vd6 constitute an optical control switch. During the day, the photoresistor RL1 is in a low resistance state under light, VT1 is saturated on, vt2 is off, relay K is not energized, normally open contact J is off, and the alarm circuit does not work; At night, RL1 changes to high resistance state, VT1 is cut off, vt2 is saturated and turned on, K is powered on to make j pull in, the circuit supplies power to the whole machine, the red LED is on, the regulated voltage is 6V, and supplies power to the subsequent circuit after voltage reduction by vd7, vd8 and vd9. Laser rods JB1, RL2, VT3, RP2, R3 and R4 form a laser transmitting and receiving network. When the alarm is in the waiting state, the laser rod emits red laser and irradiates it on the photoresist RL2. RL2 is in a low resistance state, and the base potential of VT3 is very low, which provides trigger current for thyristor vs, vs is turned on, IC2 is powered on, and the horn gives an alarm sound. The alarm can be equipped with up to 10 laser transmitting and receiving networks at the same time. The circuit structure is exactly the same, and C3 is an anti-interference capacitor. An is a reset switch. When the power grid is cut off or the gangster cuts off the power supply, the battery immediately supplies power to the whole machine, ensuring the reliability of the alarm device.Component selection: IC1 is voltage stabilizing integrated circuit 7806, and aluminum heat sink shall be added during use. IC2 is KD-9561 four sound chip, and the circuit is connected to the second sound selection terminal sel2 (fire truck alarm sound). The laser source is a red laser rod with voltage of 4.5V and power
How Do I Make My Go Kart Faster, Without Spending too Much Or Nothing?!?
What Solute Will Be Replaced by Liquid Electrolyte in Commercial Lithium Ion Battery?
Pool Stage
Introduction of Tubular Soil Moisture Monitoring Station
From the Perspective of Bridge Lighting System, the Use of LED Technology Has Become a Trend
Olar Energy Phone Charger Stand
Can Boiling Water Purify It? What's a Good Water Medium Sized Water Filter?
Precautions for Installation of Liquid Vortex Flowmeter
How Do I Connect My Desktops to Share the Internet?
Pencarian terkait
Multi Channel Laser Anti-theft Alarm Circuit
How Do I Make My Go Kart Faster, Without Spending too Much Or Nothing?!?
What Solute Will Be Replaced by Liquid Electrolyte in Commercial Lithium Ion Battery?
Pool Stage
Introduction of Tubular Soil Moisture Monitoring Station
From the Perspective of Bridge Lighting System, the Use of LED Technology Has Become a Trend
Olar Energy Phone Charger Stand
Can Boiling Water Purify It? What's a Good Water Medium Sized Water Filter?
Precautions for Installation of Liquid Vortex Flowmeter

Copyright © 2020 Concises YuGa Sports | Sitemap