Introduction of Tubular Soil Moisture Monitoring Station

Tubular soil moisture monitoring station [Hengmei instrument], also known as non-contact soil moisture meter and soil moisture meter, is a sensor based on the principle of dielectric constant. It can dynamically observe the soil moisture content of different soil layers, and make rapid, accurate and comprehensive observation, so that people can realize a high perception of the soil.

Tubular soil moisture monitoring station [Hengmei instrument] monitoring system platform, the interface map can locate the equipment location, visually view and query the latest data, historical data, unit, upper warning limit, lower warning limit, status and other contents of the equipment, set the upper and lower limit parameters, and view the alarm records. It can quickly export the selected data list in the form of exclude table file. The platform can bind multiple monitoring station devices at the same time.

The tubular soil moisture monitoring station [Hengmei instrument] adopts a layered observation structure. One temperature observation point is configured on the ground and one soil temperature and humidity measurement point is configured every 10cm for underground soil to observe the soil temperature and humidity within the corresponding range.

Product features of tubular soil moisture monitoring station [Hengmei instrument]

A plastic pipe is embedded in advance, and the main sensor is placed in the pipe, which can easily take out and replace the main sensor from the reserved pipe, with convenient maintenance and high recycling rate.

It can move up and down in the plastic pipe to realize the dynamic observation of soil moisture content in each soil layer.

It emits a high-frequency detection wave of nearly 1GHz, which can penetrate the plastic pipe and effectively perceive the soil environment.

It will not be affected by salt ions in soil, and agricultural activities such as chemical fertilizer, pesticide and irrigation will not affect the measurement results. The data are accurate.

The electrode of the sensor is not in direct contact with the soil to avoid the interference of electricity to the soil and plants in the soil.

It can flexibly customize monitors with different soil depth intervals to meet the actual needs of different users

Technical parameters of tubular soil moisture monitoring station [Hengmei instrument]

soil moisture

Measurement range: 0 100%

Measurement accuracy: 3%

soil temperature

Measuring range: - 30 ℃ 70 ℃

Measurement accuracy: 0.1 ℃

Recording interval: 30 minutes 24 hours (adjustable)

Spacing of measuring points: 10cm

Output mode: support USB interface data export

Transmission mode: 4G or GPRS wireless transmission

Storage capacity: unlimited cloud storage

Data viewing: mobile app viewing or PC cloud platform system remote viewing

Power supply mode: solar panel lithium battery combination power supply

Protective housing: PVC

Protection grade: IP68

Working environment: - 20 ℃ 85 ℃

Structural appearance: integrated pipe type (column type)

Size: outer diameter 6cm, height 78.2cm

Introduction of Tubular Soil Moisture Monitoring Station 1

get in touch with us
Artikel yang disarankan
Multi Channel Laser Anti-theft Alarm Circuit
The figure shows the circuit of multi-channel laser anti-theft alarm. VT1, vt2, RL1, RP1, R1, K and vd6 constitute an optical control switch. During the day, the photoresistor RL1 is in a low resistance state under light, VT1 is saturated on, vt2 is off, relay K is not energized, normally open contact J is off, and the alarm circuit does not work; At night, RL1 changes to high resistance state, VT1 is cut off, vt2 is saturated and turned on, K is powered on to make j pull in, the circuit supplies power to the whole machine, the red LED is on, the regulated voltage is 6V, and supplies power to the subsequent circuit after voltage reduction by vd7, vd8 and vd9. Laser rods JB1, RL2, VT3, RP2, R3 and R4 form a laser transmitting and receiving network. When the alarm is in the waiting state, the laser rod emits red laser and irradiates it on the photoresist RL2. RL2 is in a low resistance state, and the base potential of VT3 is very low, which provides trigger current for thyristor vs, vs is turned on, IC2 is powered on, and the horn gives an alarm sound. The alarm can be equipped with up to 10 laser transmitting and receiving networks at the same time. The circuit structure is exactly the same, and C3 is an anti-interference capacitor. An is a reset switch. When the power grid is cut off or the gangster cuts off the power supply, the battery immediately supplies power to the whole machine, ensuring the reliability of the alarm device.Component selection: IC1 is voltage stabilizing integrated circuit 7806, and aluminum heat sink shall be added during use. IC2 is KD-9561 four sound chip, and the circuit is connected to the second sound selection terminal sel2 (fire truck alarm sound). The laser source is a red laser rod with voltage of 4.5V and power
How Do I Make My Go Kart Faster, Without Spending too Much Or Nothing?!?
What Solute Will Be Replaced by Liquid Electrolyte in Commercial Lithium Ion Battery?
Pool Stage
From the Perspective of Bridge Lighting System, the Use of LED Technology Has Become a Trend
Olar Energy Phone Charger Stand
Can Boiling Water Purify It? What's a Good Water Medium Sized Water Filter?
Precautions for Installation of Liquid Vortex Flowmeter
How Do I Connect My Desktops to Share the Internet?
How Do I Potty Train a Puppy Dog?
Pencarian terkait
Multi Channel Laser Anti-theft Alarm Circuit
How Do I Make My Go Kart Faster, Without Spending too Much Or Nothing?!?
What Solute Will Be Replaced by Liquid Electrolyte in Commercial Lithium Ion Battery?
Pool Stage
From the Perspective of Bridge Lighting System, the Use of LED Technology Has Become a Trend
Olar Energy Phone Charger Stand
Can Boiling Water Purify It? What's a Good Water Medium Sized Water Filter?
Precautions for Installation of Liquid Vortex Flowmeter
How Do I Connect My Desktops to Share the Internet?

Copyright © 2020 Concises YuGa Sports | Sitemap